our products

Rugged display, to be used with multiple input video stream. The product is usually used connected to 3 external cameras to allow the driving of the vehicle from inside.

Customized metallic enclosure with specific filtering solution, allowing automotive ECUs (engine, transmission, … control units) to gain full military-level EMC compliance.

The device provides an auxiliary battery (internal or external) recharge system, draining power from the vehicle only when engine and alternator are running and provide power to several external loads.
The BMS controls the value of the voltages and currents of every input and output and can send the information to other equipment via CANBUS.

The device converts the input speed signal from CANBUS to a square wave signal.
Considering the status of the vehicle transmission, it activates a warning lamp signal for overspeed or over running engine.

The device provides electrical power supply for auxiliary various use for the crew (USB/12V/24V)

The device manages the auxiliary battery (internal or external) recharge, draining power from the vehicle only when engine and alternator are running and provide power to several external loads.
The BMS controls the value of the voltages and currents of every input and output and can send the information to other equipment via CANBUS.

Body computer for MUX vehicular system. The devices includes various digital and analog input signals and high current output, being able itself to control all auxiliary functions of a vehicle.

Body computer for MUX vehicular system. The devices includes a full-redundant structure in order to achieve an higher level of reliability.

Range of devices providing multi-utility power and CAN distribution in many branches as required by the vehicle structure.

The device is a driver position switcher that allows to switch all driving signals (comands and signalling) between two different driving seats of a special vehicle, that can be used alternatively.

Modular switch controller: one single unit acquires all switch status of a control panel, dealing with a remote electronic central unit, allowing to reduce harness complexity down to a CAN-BUS line, or similar. Switch feedbacks and lamps could also be remotely controlled, been activated only when the central unit aknowlegde the function activation.

Specific on-wire filtering solution for a COTS device

System EMC compliance analyze, development of filtering solution to achieve the EMC compliance and certification at military levels.

Specific HMI customized on specific application, based on already available platform or new development following customer requirements.

Multi-purpose DC/DC converters, without fan

Development and production of specific ECUs for use on military / automotive vehicular system.
The product could be based on an existing solution, or completely designed following customer requirements. The device concept can start from simple digital/discrete logic, up to complex advanced multiprocess units. Design of all part is done internally by ITALWATT technicians.

Development and production of specific distribution devices for use on military / automotive vehicular system.
The product could be based on an existing solution, or completely designed following customer requirements.

Interface box to connect to the vehicle with diagnostic service tools.

Filtering solution for automotive COTS fuel pumps

Metallic enclosure comprending specific filtering solutions to reach EMI compliance at MIL standards.

Metallic enclosure comprending specific filtering solutions to reach EMI compliance at MIL standards.

Filtering solution for automotive COTS wiper motor

The device manages the operation of an air conditioning system, with multiple input signals (pressure switch, temperatures, flow sensors,..) and outputs for actuations, valves activations, fans,...

Rugged HMI Display with comand buttons, fully customizable in terms of graphic and functionality. Based on 32 bit embedded system.

Rugged HMI Display with comand buttons, fully customizable in terms of graphic and functionality. Based on i.MX6 Quad Core processor .

Rugged HDMI / Digital Display with comand buttons on serial interface. The display could be used as an HDMI display or as dashboard for advanced digital vision system.

24Vdc / 230 Vac interver without fan. The inverter has an internal differential-current protection device.

Customized COTS oil sensor: harness length and connector type according to customer requirements.

Rugged switch enclosed in customized metallic enclosure

The device provides power to several high current external loads and contains an high power DC/DC converter. It controls the value of the voltages and currents of every input and output and can send the information to other equipment via CANBUS. Every output is singularly protected for overcurrent.

The device manages the operation of a hydralic ramp, with multiple input signals (ramp position, ramp locked,..) and outputs for hydraulic valves activations.

The device acts as multi-purpose remot unit for vehicular MUX system. It provides fully software-configurable I/O and comprehensive diagnostic.
The device recognizes its position in the vehicle architecture and loads the correct software using a wired configuration input.

The device acts as multi-purpose remot unit for vehicular MUX system. It provides fully software-configurable I/O and comprehensive diagnostic.
The device recognizes its position in the vehicle architecture and loads the correct software using a wired configuration input.

The device acts as multi-purpose electronic unit for vehicular system. It provides various software-configurable functions and comprehensive diagnostic.

An automotive COTS wiper motor enclosed in a metallix custom box